HP Virtual Connect 1.10Gb-F Ethernet Module for c-Class BladeSystem - Manual (Page 20)

Command line 20
Item Description
->show enclosure encl
Displays detailed information for a single enclosure
enet-connection
Manage Ethernet network connections.
Supported actions: add, help, remove, set, show
Item Description
add enet-connection Add a new Ethernet network connection to an existing server profile.
The maximum number of Ethernet connections that can be added to a
server profile is 32.
Syntax add enet-connection <ProfileName>
[Network=<NetworkName>]
[PXE=<enabled|disabled|UseBios>]
[AddressType=Factory-Default|User-Defined>]
[EthernetMAC=<MAC Address> iScsiMAC=<MAC Address>]
[SpeedType=<Auto|Preferred|Custom] [Speed=<speed>]
Parameter
ProfileName (required) The name of an existing profile to which the new connection is added.
Properties
Network (optional) The name of an existing network to associate with the connection. If the
network name is not specified, or is set to "unassigned", then the
network remains unassigned. (optional)
PXE (optional) Enables or disables PXE on the network connection. Valid values are
"enabled", "disabled", and "UseBios". If this value is not specified, the
default is "UseBios".
Only one connection can have PXE enabled per profile.
AddressType (optional) The source of MAC address assignments to be used during the creation
of the new connection. If not specified, the default is the domain default.
If "User-Defined" is specified, then both an Ethernet MAC Address and
iSCSI MAC Address must also be specified. Valid values include
"Factory-Default" and "User-Defined".
EthernetMAC (required if
AddressType is User-
Defined)
The user-defined Ethernet MAC address to use for the connection. This
property is required if the AddressType specified is "User-Defined".
iScsiMAC (required if
AddressType is User-
Defined)
The user-defined iSCSI MAC address to use for the connection. This
property is required if the AddressType specified is "User-Defined".