HP Virtual Connect 1.10Gb-F Ethernet Module for c-Class BladeSystem - Manual (Page 46)

Command line 46
Item Description
Examples
->set port-monitor AnalyzerPort=enc0:3:1 Speed=1Gb
Duplex=half
Modifies network analyzer uplink port properties
->set port-monitor MonitorPort=enc0:1:6 Direction=ToServer
Modifies a monitored server port
->set port-monitor Enabled=true
Enables port monitoring
->set port-monitor Enabled=false
Disables port monitoring
Item Description
show port-monitor Display the Virtual Connect port monitor configuration.
Syntax show port-monitor
Example
->show port-monitor
Displays the port monitor configuration
profile
Manage server profiles.
Supported actions: add, assign, help, remove, set, show, unassign
Item Description
add profile
Create a new server profile. After the profile has been created, the profile can
then be configured using the "set" subcommand and additional network and
fabric connections can also be added. The server profile can also be assigned to
a device bay using the "assign" subcommand.
Syntax add profile <ProfileName> [-NoDefaultEnetConn] [-
NoDefaultFcConn] [SNType=<Factory-Default|User-
Defined>] [SerialNumber=<serialnumber>]
[UUID=<uuid>]
Parameter
ProfileName The unique name of the new server profile to create
Options
NoDefaultEnetConn Do not add default Ethernet Network connections when creating the server
profile.
NoDefaultFcConn Do not add default FC SAN connections when creating the server profile.
Properties
SNType (Optional) The source of the serial number assignment to be used during the profile
creation. If not specified, the serial number is assigned according to the Virtual
connect default domain settings. Valid values include "Factory-Default" and
"User-Defined".