HP Virtual Connect 8Gb 20-port Fibre Channel Module for c-Class BladeSystem - Manual (Page 184)

Virtual Connect server profiles 184
Column name Description
network.
Auto—VCM determines the appropriate port speed based on the available
bandwidth for the port.
Preferred—Use the preferred speed of the SAN Fabric or FCoE network
selected for this connection. If no preferred speed is configured, VCM
determines the speed.
Custom—Allows you to select a custom port speed setting between 100Mb
and the configured maximum connection speed in 100Mb increments
Disabled—The FCoE connection is disabled and no bandwidth is allocated.
1,2,4, and 8Gb—Predefined custom port speed selection that can be used for
the FCoE connection assigned to a SAN Fabric
WWPN
Type of WWN address assignment configured for the Virtual Connect
domain
MAC Type of MAC address assignment configured for the Virtual Connect domain
Action Perform delete operations
Assign Profile to Server Bay
Power Icon indicates if the server blade is powered on or off (when a server blade is
selected).
Server Bay Assignment Displays the enclosure name, bay number, and type of server blade
S/N Serial number of the server blade in the device bay
Model
Model name of the server blade in the device bay
Status Status of the server blade in the device bay
UID Icon indicates if the server blade UID is on or off.
* Only Flex-10 NICs and FlexFabric NICs connected to Flex-10 modules and FlexFabric modules are able to set the
transmit bandwidth allocation. Other parts are restricted to the actual physical speed (1Gb).
The following table describes the available actions in the Define Server Profile screen. Clicking another link
in the pull-down menu or left navigation tree causes current edits that have not been applied to be lost.
Task Action
Change a profile name
Edit a name in the Profile Name field.
Associate a network access
group
Click the Network Access Group pull-down arrow, and then select a network
access group.
Select to use server factory
defaults for Ethernet MAC
addresses
Select the Advanced Profile Settings check box, and then select the Use Server
Factory Defaults for Ethernet MAC addresses check box.
Select to use server factory
defaults for Fibre Channel
WWNs
Select the Advanced Profile Settings check box, and then select the Use Server
Factory Defaults for Fibre Channel WWNs check box.
Select to use factory defaults for
serial numbers
Select the Advanced Profile Settings check box, and then select the Use Server
Factory Defaults for Serial Numbers check box.
Assign a Network Name 1 Click Unassigned in the Network Name field, and then click the pull-down
arrow.
2 Click Select a network.. or Multiple Networks to find and select a network
for this connection.
See "Multiple network connections for a server port (on page 197 )."
Change the port speed setting 1 Click the pull-down arrow in the Port Speed Type Column.
2 Select Preferred, Auto, Custom, or Disabled. If Custom is selected, set the
port speed, and then click OK.