HP Virtual Connect 8Gb 20-port Fibre Channel Module for c-Class BladeSystem User Manual

Page 42

Advertising
background image

Virtual Connect domains 42

The VC-Enet SNMP settings apply to all VC-Enet modules in the Virtual Connect domain.

The following table describes the fields within the SNMP Configuration screen.

Field name

Description

Enable SNMP

Select to enable SNMP.

System Contact

Specify a contact name for this system when SNMP is enabled.

Read Community

Controls SNMP read access when SNMP is enabled. The default value for read

community string is "public". The read community string must always be set when

SNMP is enabled. The maximum length is 39 characters.

SNMP Access

Table of networks that are allowed SNMP access

IP Address

IPv4 or IPv6 address for the allowed network

Network Mask Bits

Network mask bits for the allowed network

Type

Type of network

Action

Perform add and delete actions

SNMP Trap Destinations

SNMP trap destination table

Destination

User-designated name for the trap destination. The Destination name must be
unique.

IP Address

IPv4 or IPv6 address or DNS name for the trap destination

Community String

The Community String acts like a password for a given trap destination. The

trap-receiving application can use the community string to filter the incoming traps.
Default: public

Action

Perform edit and delete operations

The following table describes the available actions in the SNMP Configuration screen. Clicking another link

in the pull-down menu or left navigation tree causes current edits that have not been applied to be lost.

Task

Action

Add SNMP access ("

Adding

SNMP access

" on page

44

)

Click Add below the SNMP Access table, or right-click on the header row
of the SNMP Access table, and then select Add.

Advertising