Role management (role operations) screen – HP Virtual Connect 8Gb 20-port Fibre Channel Module for c-Class BladeSystem User Manual
Page 84
Virtual Connect users and roles 84
"radius:user1", or a default login without a prefix, such as "user1", the login succeeds if credentials are
correct and the authentication service is enabled, regardless of what role authentication orders are defined.
By default, VCM queries the authentication services for each role in the following order:
•
Domain: local > ldap > radius > tacacs
•
Network: tacacs > radius > local
•
Server: ldap > local
•
Storage: radius > local
If a method fails, the next method is tried, and so on.
For each role (Domain, Network, Server, and Storage):
1.
Select the check boxes corresponding to the authentication services to query on user login.
2.
Configure the order of the queries:
a.
Click an authentication service to highlight it.
b.
Click the up and down arrows to set the query order.
3.
Click Apply.
Unselected authentication services are not queried, regardless of the order in which they appear.
Clicking another link in the pull-down menu or left navigation tree causes current edits that have not been
applied to be lost.
Role Management (Role Operations) screen
Use this screen to change the role operations allowed for Network, Server, Storage, and Domain roles. You
must have Domain Administrator role permission to make these changes. Changes apply to all users