Fc bay summary screen – HP Virtual Connect 8Gb 20-port Fibre Channel Module for c-Class BladeSystem User Manual
Page 255
Virtual Connect modules 255
FC Bay Summary screen
This screen provides a summary of the interconnect module status and port information. To remove a module,
see "Interconnect module removal and replacement (on page
)."
The following table describes the rows within the Interconnect Bay Status (VC-FC Module) table in the Bay
Summary screen.
Row
Description
Overall Status
Represents the worst condition of OA Reported Status, VC Status, and OA
Communication Status
Hardware Status
Component health status from the Onboard Administrator
VC Status
Component health status from the Virtual Connect Manager
OA Communication Status
Current Virtual Connect Manager to Onboard Administrator communication
state
Rack Name
Name of the enclosure rack (assigned through the Onboard Administrator)
Enclosure Name
Name of the enclosure (assigned through the Onboard Administrator)
Bay
Number of the bay being summarized on this screen
Power Status Control
Power state of the device
Uplink Ports Used
Number of uplink ports used to connect to the SAN. This number specifies the
oversubscription ratio (4:1, 8:1, or 16:1).
The following table describes the rows within the Interconnect Bay Information table in the Bay Summary
screen.
Row
Description
Part Number
The part number to be used when ordering an additional module of this type