Moving the printer – HP LaserJet 4300 Printer series User Manual
Page 18
16 Chapter 1 Printer basics
ENWW
Moving the printer
The printer is heavy and should be lifted by two people. To lift the printer, grip the handles on the
sides of the printer. If the bottom of the printer is attached to an optional accessory (such as a
500-sheet tray and feeder, 1,500-sheet tray and feeder, or storage cabinet), the accessory
latches must be unlocked before moving the printer.
WARNING!
To prevent possible injury or damage to the printer, separate the printer from any currently
installed optional accessories (for example, an optional tray and feeder or a stapler/stacker) before
lifting the printer.
Locking and unlocking optional accessories
For more stability against tipping over, the optional tray and feeder units and the cabinet can be
locked to the bottom of the printer.
To lock the accessories, locate the lever on the upper left side of the optional tray and feeder and
rotate the lever to the rear (locked) position.
To unlock the accessories, rotate the lever to the forward (unlocked) position.