HP LaserJet 4300 Printer series - Manual (Page 101)

ENWW Clearing jams 99
Clearing jams from the optional envelope
feeder
This section applies only to jams that occur when you are using an
optional envelope feeder.
To clear jams from the optional envelope feeder
1 Remove any envelopes loaded in the optional envelope feeder.
Lower the envelope weight and lift the tray extension up to the
closed position.
2 Press and hold the release button on the left side of the optional
envelope feeder. Grasp both sides of the optional envelope feeder
and carefully pull it out of the printer.
3 Slowly remove any envelopes from the optional envelope feeder
and the printer.
4 Insert the optional envelope feeder into the printer until it locks into
place. (The connector on the top right side of the optional envelope
feeder fits into the plug in the printer.) Pull gently on the optional
envelope feeder to be sure that it is securely in place.
5 Open and close the top cover to clear the jam message.
6 If a jam message persists, there is still a jammed envelope in the
printer. Look for the jam in another location. (See
“Jam locations” on
page 96 .)
7 Reload envelopes, making sure that you push the bottom
envelopes in slightly further than the top envelopes. (See
“Loading
envelopes in the optional envelope feeder” on page 56 .)
1
2
3
4
5