HP LaserJet 4300 Printer series - Manual (Page 105)

ENWW Clearing jams 103
Clearing jams from the output areas
To clear jams from the output areas
1 Open the rear output bin. If most of the paper is still inside the
printer, it might be easier to remove it through the top-cover area.
(See
“To clear jams from the top-cover and print-cartridge areas” on
page 97 .)
2 Grasp both sides of the paper, and slowly pull the paper out of the
printer. (There might be loose toner on the paper. Be careful not to
spill it on yourself or into the printer.)
Note
If the jammed paper is difficult to remove, try opening the top cover all
the way to release pressure on the paper.
If the paper has torn, or you still cannot remove it, see “Clearing jams
from the fuser area” on page 104 .
3 Close the rear output bin.
4 Open and close the top cover to clear the jam message.
5 If a jam message persists, there is still jammed paper in the printer.
Look for the jam in another location. (See
“Jam locations” on
page 96 .)
1
2
3
4