HP LaserJet 4300 Printer series - Manual (Page 156)

154 Appendix A Control panel menus ENWW
Paper Handling menu
If paper-handling settings are correctly configured at the printer control panel, you can print by
selecting the type and size of paper in the program or printer driver. For more information about
configuring for paper types and sizes, see
“Printing by type and size of paper (locking trays)” on
page 48 . For more information about supported paper types and sizes, see “Supported sizes
and weights of paper” on page 183 and “Supported types of paper” on page 187.
Some items on this menu (such as duplex and manual feed) are available in the program or
printer driver (if the appropriate driver is installed). Program and printer driver settings override
control panel settings. For more information, see
“Using printer driver features” on page 68 .
The section that follows lists the settings and possible values. In the Values column, the default
value for each setting is the one with an asterisk (*) next to it.
Item Values Explanation
ENVELOPE FEEDER SIZE ANY
*COM10 ENVELOPE
MONARCH ENVELOPE
C5 ENVELOPE
DL ENVELOPE
B5 ENVELOPE Appears only if the optional envelope feeder is
installed. Set the value to correspond with the envelope
size currently loaded in the optional envelope feeder.
ENVELOPE FEEDER TYPE ANY
* PLAIN
PREPRINTED
LETTERHEAD
PREPUNCHED
LABELS
BOND
RECYCLED
COLOR
CARDSTOCK > 64 g/m
2
ROUGH
Appears only if the optional envelope feeder is
installed. Set the value to correspond with the envelope
type currently loaded in the optional envelope feeder.
TRAY 1 SIZE * ANY
LETTER
LEGAL
EXECUTIVE
A4
A5
ISOB5
JISB5
JEXEC
JPOSTD
16
COM 10 ENVELOPE
MONARCH ENVELOPE
C5 ENVELOPE
DL ENVELOPE
B5 ENVELOPE
CUSTOM
Sets the value to correspond with the paper size
currently loaded in tray 1.
ANY : If both the type and size for tray 1 are set to ANY ,
the printer will pull paper from tray 1 first as long as
paper is loaded in the tray.
A size other than ANY : The printer does not pull from
this tray unless the type or size of the print job matches
the type or size loaded in this tray.
For more information, see “Customizing tray 1
operation” on page 47 .