HP LaserJet 4300 Printer series - Manual (Page 159)

ENWW Configure Device menu 157
Configure Device menu
This menu contains administrative functions.
Printing submenu
Some items on this menu are available in the program or printer driver (if the appropriate driver is
installed). Program and printer driver settings override control panel settings. In general, it is
better to change these settings in the printer driver, if applicable.
The section that follows lists the settings and possible values. In the Values column, the default
value for each setting is the one with an asterisk (*) next to it.
Item Values Explanation
COPIES * 1 to 32000 Sets the default number of copies by selecting any number
from
1 to 32000 . Use U P ARROW ( ) or D OWN ARROW ( )
to select the number of copies. This setting applies only to
print jobs that do not have the number of copies specified in
the program or printer driver, such as a DOS, UNIX, or Linux
application.
Note
It is best to set the number of copies in the program or printer
driver. (Program and printer driver settings override control
panel settings.)
DEFAULT PAPER
SIZE ANY
* LETTER
LEGAL
EXECUTIVE
A4
A5
ISOB5
JISB5
JEXEC
JPOSTD
16K
COM10 ENVELOPE
MONARCH ENVELOPE
C5 ENVELOPE
DL ENVELOPE
B5 ENVELOPE
CUSTOM
Sets the default image size for paper and envelopes. (The
item name changes from paper to envelope as you scroll
through the available sizes.) This setting applies only to print
jobs that do not have the paper size specified in the program
or printer driver.
DEFAULT CUSTOM
PAPER SIZE UNIT OF MEASURE
X DIMENSION
Y DIMENSION Sets a default custom paper size for tray 1 or any 500-sheet
tray. This menu appears only if the Custom-Standard switch
in the selected tray is set to Custom.
PAPER
DESTINATION * STANDARD OUTPUT
FACE UP
OPTIONAL BIN
Configures the output paper bin destination. Only installed
optional bins appear on the menu.
DUPLEX * OFF
ON
Appears only if an optional duplex printing accessory is
installed. Set the value to
ON to print on both sides (duplex) or
OFF to print on one side (simplex) of a sheet of paper.
DUPLEX BINDING * LONG EDGE
SHORT EDGE
Changes the binding edge for duplex printing. The menu
item appears if an optional duplexer is installed in the printer
and
DUPLEX=ON .
OVERRIDE A4/
LETTER * NO
YES
Allows the printer to print an A4-size job on letter-size paper
if A4-size paper is not loaded in the printer (or vice versa).