Pcl submenu, Manual, Print ps errors” on – HP LaserJet 4300 Printer series User Manual
Page 160
158 Appendix A Control panel menus
ENWW
PCL submenu
The section that follows lists the settings and possible values. In the Values column, the default
value for each setting is the one with an asterisk (*) next to it.
MANUAL FEED
*
OFF
ON
Feeds the paper manually from tray 1, rather than
automatically from a tray. If
MANUAL FEED=ON
and tray 1 is
empty, the printer goes offline when it receives a print job.
MANUALLY FEED
[PAPER SIZE]
appears on the printer control
panel display.
COURIER FONT
*
REGULAR
DARK
Selects the version of Courier font to use:
REGULAR
: The internal Courier font available on the
HP LaserJet 4 series printers.
DARK
: The internal Courier font available on the HP LaserJet
III series printers.
WIDE A4
*
NO
YES
Changes the number of characters that can be printed on a
single line of A4-size paper.
NO
: Up to 78 10-pitch characters can be printed on one line.
YES
: Up to 80 10-pitch characters can be printed on one line.
PRINT PS ERRORS
*
OFF
ON
Determines whether a PS error page prints or not.
OFF
: PS error page never prints.
ON
: PS error page prints when PS errors occur.
Item
Values
Explanation
Item
Values
Explanation
FORM LENGTH
5
to
128
(*
60
)
Sets vertical spacing from 5 to 128 lines for default
paper size.
ORIENTATION
*
PORTRAIT
LANDSCAPE
Allows you to select default page orientation.
Note
It is best to set the page orientation in the program or
printer driver. (Program and printer driver settings
override control panel settings.)
FONT SOURCE
*
INTERNAL
SOFT
SLOT 1
,
2
, or
3
INTERNAL
: Internal fonts.
SOFT
: Permanent soft fonts. This option is available
only if it is installed.
SLOT 1
,
2
, or
3
: Fonts stored in one of the three DIMM
slots. This option is available only if it is installed.
FONT NUMBER
*
0
to
999
The printer assigns a number to each font and lists the
numbers on the PCL Font List. The font number
appears in the Font # column of the printout.
FONT PITCH
0.44
to
99.99
(*
10.00
) Selects the font pitch. This item might not appear,
depending on the font selected.
FONT POINT SIZE
4.00
to
999.75
(*
12.00
)
Selects the font point size. This appears only if a font
with a scalable point size is selected as the default
font.
SYMBOL SET
*
PC-8
Several
Selects any one of several available symbol sets at the
printer control panel. A symbol set is a unique grouping
of all the characters in a font. PC-8 or PC-850 is
recommended for line-draw characters.