HP LaserJet 4300 Printer series - Manual (Page 161)

ENWW Configure Device menu 159
Print Quality submenu
Some items on this menu are available in the program or printer driver (if the appropriate driver is
installed). Program and printer driver settings override control panel settings. For more
information, see
“Using printer driver features” on page 68 . In general, it is best to change these
settings in the printer driver, if applicable.
The section that follows lists the settings and possible values. In the Values column, the default
value for each setting is the one with an asterisk (*) next to it.
APPEND CR TO LF * NO
YES
Select YES to append a carriage return to each line
feed encountered in backward-compatible PCL jobs
(pure text, no job control). Some environments, such
as UNIX, indicate a new line using only the line feed
control code. This option allows you to append the
required carriage return to each line feed.
Item Values Explanation
SET REGISTRATION There is no value
to select. Shifts the margin alignment to center the image on
the page from top to bottom, and left to right. You can
also align the image that is printed on the front with
the image that is printed on the back.
PRINT TEST PAGE There is no value
to select. Prints a test page to show the current registration
settings.
SOURCE ALL TRAYS
TRAY 1
*TRAY 2
TRAY [N] Selects the tray for which you want to print the test
page. If installed, optional trays appear as selections,
where [
N ] is the number of the tray.
ADJUST TRAY [N]
X1 Shift
X2 Shift
Y Shift
-20 to 20 (* 0 ) Sets the registration for the specified tray, where [ N ] is
the number of the tray. A selection appears for each
tray that is installed, and registration must be set for
each tray.
X1 SHIFT : Registration of the image on the paper
from side to side, as the paper lies in the tray. For
duplexing, this side is the second side (back) of the
paper.
X2 SHIFT : Registration of the image on the paper
from side to side, as the paper lies in the tray, for the
first side (front) of a duplexed page. This item
appears only if an optional duplexer is installed and
enabled. Set the
X1 SHIFT first.
Y SHIFT : Registration of the image on the paper from
top to bottom as the paper lies in the tray.
Item Values Explanation