HP LaserJet 4300 Printer series - Manual (Page 168)

166 Appendix A Control panel menus ENWW
Resets submenu
Items on the Resets submenu relate to returning settings to the defaults and changing settings
such as PowerSave.
The section that follows lists the settings and possible values. In the Values column, the default
value for each setting is the one with an asterisk (*) next to it.
Item Values Explanation
RESTORE FACTORY
SETTINGS There is no value
to select. Performs a simple reset and restores most of the factory
(default) settings. This item also clears the input buffer for
the active I/O. Restoring factory settings does not affect
network parameter settings on the optional HP Jetdirect
print server.
CAUTION
Restoring memory during a print job cancels the print job.
CLEAR MAINTENANCE
MESSAGE There is no value
to select. Appears after the PERFORM PRINTER MAINTENANCE message.
The PERFORM PRINTER MAINTENANCE message can be
temporarily cleared for approximately 10,000 pages, and
then the message appears again. When the
PERFORM
PRINTER MAINTENANCE message first appears, a new
maintenance kit should be installed to maintain optimum
print quality and feed performance.
For more information, see “Performing preventative
maintenance” on page 91 . To order the printer
maintenance kit, see “Ordering information” on page 17 .
POWERSAVE OFF
* ON
Turns PowerSave mode on or off. PowerSave mode does
the following:

minimizes the amount of power consumed by the
printer when it is idle

reduces wear on electronic components in the printer
(turns off the display backlight, but display is still
readable)
The printer automatically comes out of PowerSave mode
when you send a print job, press a printer control panel
button, open a tray, or open the top cover.
You can set how long the printer remains idle before it
enters PowerSave mode. (See the
POWERSAVE TIME in
the “System Setup submenu” on page 162 .)