Installing memory, To install memory” on – HP LaserJet 4300 Printer series User Manual
Page 172
170 Appendix B Printer memory and expansion
ENWW
Installing memory
If you have not already done so, print a configuration page to find out how much memory is
installed in the printer before adding more memory. (See
“Configuration page” on page 83
To install memory
CAUTION
Static electricity can damage DIMMs. When handling DIMMs, either
wear an antistatic wrist strap or frequently touch the surface of the
DIMM antistatic package, then touch bare metal on the printer.
1
Turn the printer power off.
2
Unplug the power cord and disconnect any cables.
3
Grasp the cover on the right side of the printer and pull it firmly
toward the rear of the printer until it stops.
4
Remove the cover from the printer.
5
Open the DIMM-access door by pulling on the metal tab.
1
4
5
2
3