HP LaserJet 4300 Printer series - Manual (Page 202)

200 Appendix E Regulatory information ENWW
Declarations of Conformity
Canadian DOC regulations
Complies with Canadian EMC Class B requirements.
Conforme à la classe B des normes canadiennes de compatibilité électromagnétique (CEM).
Declaration of Conformity
according to ISO/IEC Guide 22 and EN 45014
Manufacturer’s Name: Hewlett-Packard Company
Manufacturer’s Address: 11311 Chinden Boulevard
Boise, Idaho 83714-1021, USA
declares that the product
Product Name: HP LaserJet 4200 series
HP LaserJet 4300 series
Regulatory Model Numbers: BOISB-0203-00
BOISB-0204-00
Product Options: ALL
conforms to the following Product Specifications: 1)
Safety: IEC 60950:1999 / EN 60950:2000
IEC 60825-1:1993+A1 / EN 60825-1+A11 Class 1 Laser/LED Product
GB4943:1995
EMC: CISPR 22:1993+A1+A2 / EN 55022:1994+A1+A2 Class B
*2)
EN 61000-3-2:1995 / A14
EN 61000-3-3:1995
EN 55024:1998
FCC Title 47 CFR, Part 15 Class B
3
/ ICES-003, Issue 3
AS /NZS 3548:1995+A1+A2 GB9254:1998
Supplementary Information:
The product herewith complies with the requirements of the EMC Directive 89/336/EEC and the Low Voltage Directive 73/23/EEC, and carries
the CE-Marking accordingly.
1) The product was tested in a typical configuration with Hewlett-Packard Personal Computer Systems.
2) The product includes LAN (local area network) options. When the interface cable is attached to LAN connectors, the product meets the
requirements of EN55022 Class A in which case the following applies: Warning — This is a class A product. In a domestic environment, this
product may cause radio interference in which case a user may be required to take adequate measures.
3) This Device complies with Part 15 of the FCC Rules. Operation is subject to the following two Conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Boise, Idaho, USA
17 April 2002
For regulatory topics ONLY, contact:
Australia Contact: Product Regulations Manager, Hewlett-Packard Australia Ltd., 31-41 Joseph Street, Blackburn, Victoria 3130, Australia
Europe Contact: Your Local Hewlett-Packard Sales and Service Office or Hewlett-Packard Gmbh, Department HQ-TRE / Standards
Europe, Herrenberger Straße 130, D-71034 Böblingen (FAX: +49-7031-14-3143)
USA Contact: Product Regulations Manager, Hewlett-Packard Company, PO Box 15, Mail Stop 160, Boise, ID 83707-0015 (Phone:
208-396-6000)