HP LaserJet 4300 Printer series - Manual (Page 40)

38 2 Printing tasks ENWW
Orientation of paper when a stapler is installed
When an optional stapler/stacker is installed, the printer automatically rotates the printed images
180° on all paper sizes, even if the job is not stapled. If you are printing on paper that requires a
specific orientation (such as letterhead, preprinted paper, prepunched paper, and paper with
watermarks), make sure that the paper is loaded correctly in the tray. The correct orientation of
the paper in the trays is shown below.
For single-sided printing and stapling from tray 1, load the front side facing up and the top edge
toward you. For single-sided printing and stapling from all other trays, load the front side facing
down and the top edge toward the printer.
For duplex (two-sided) printing and stapling from tray 1, load the front side facing down and the
top edge toward the printer. For duplex printing and stapling from all other trays, load the front
side facing up and the top edge toward you.
Tray 1 single-sided All other trays
single-sided
All other trays duplex
(2-sided)
Tray 1 duplex
(2-sided)