Loading staples – HP LaserJet 4300 Printer series User Manual
Page 43
ENWW
Stapling documents 41
Loading staples
Load staples if the printer control panel display prompts you with a
STAPLER LOW ON STAPLES
message (the stapler has fewer than 70
staples left) or a
STAPLER OUT OF STAPLES
message (the stapler is
empty). If the stapler runs out of staples, jobs continue to print to the
stapler/stacker, but they will not be stapled.
To load staples
1
On the right side of the stapler/stacker, turn the stapler unit toward
the front of the printer until the unit clicks into the open position.
Grasp the blue staple-cartridge handle and pull the cartridge out of
the stapler unit.
2
Insert the new staple cartridge into the stapler unit and rotate the
stapler unit toward the rear of the printer until the unit snaps into
place.
1
2