HP Intelligent Infrastructure Analyzer Software - Manual (Page 23)

To modify a profile:
1.
Select the existing profile in the Manage SAN Profiles page.
2. Click Edit. The Update SAN Profile page is displayed in a separate window.
3. Change the profile and follow the “Creating new SAN profile for monitoring switches, hosts,
and storage devices” (page 17) procedure (step: 2 onwards).
CAUTION: Modifying Data Collection Frequency may result in loss of monitored data and also
may result in delayed SFP diagnostic by few DC cycles depending on the frequency modified.
Activate SAN profile
To start continuous data collection, SFP monitoring, and diagnostics, a profile must be activated.
To activate a SAN profile:
1.
Select the existing SAN profile in the Manage SAN Profiles page.
2. Click Activate.
3. The Activate SAN Profile window is displayed with the following message:
Do you wish to Activate the SAN Profile – XYZ (name of the SAN profile)
•
Click Yes to activate the SAN profile.
•
Click No to cancel the activation.
4. The active SAN profile name is displayed on every HP IIAS page, as shown in Figure 10
(page 23) .
Figure 10 Active SAN profile name
NOTE: You can activate only one SAN profile at a time and that profile is monitored. You
can change the active SAN profile at any time.
Deactivate SAN profile
To stop continuous data collection, SFP monitoring, and diagnostics, the profile must be deactivated.
To deactivate a SAN profile:
1.
Select the current active profile in the Manage SAN profiles page.
2. Click Deactivate.
Using HP IIAS 23