HP Intelligent Infrastructure Analyzer Software - Manual (Page 7)

2 Installing, repairing, upgrading, and removing HP IIAS
Installing HP IIAS
To install HP IIAS , complete the following steps:
1.
Download HP IIAS package from the following website:
www.hp.com/go/hp_iias .
2. Select a folder (for example, C:\temp) and save the HP IIAS install package.
3. Run IIAS_Setup.exe, and follow the steps to install the HP IIAS files.
4. Review and accept the license agreement.
By default, the HP IIAS files and documentation are installed in the following folder:
<Install_Dir>\HP Intelligent Infrastructure Analyzer Software
A message is displayed on completion of the HP IIAS installation.
5. While installing the HP IIAS product, the installer checks for the availability of the required
port numbers. If any of the required ports are already in use, then the installer will prompt
asking for alternate port numbers as shown in
Figure 1 (page 7) .
Figure 1 Port Configuration
NOTE: If any issues are faced while launching HP IIAS, try changing the logon user for
IIASServer service explicitly to an administrator user.
Repairing HP IIAS
To repair the currently installed HP IIAS:
1.
Run the IIAS_Setup.exe setup executable file.
2. Select Repair to repair the current installation.
Installing HP IIAS 7