Define server profile screen (multiple enclosures), Advanced profile settings – HP 1.10GB Virtual Connect Ethernet Module for c-Class BladeSystem User Manual
Page 121
Server management 121
o
Data digest: Data Digest disabled
o
Authentication Type: Mutual CHAP
Define Server Profile screen (multiple enclosures)
When defining server profiles in a multi-enclosure configuration, profiles can be assigned to server bays in
any of the enclosures that have been added and imported into the domain.
Advanced Profile Settings
MAC addresses for the domain are provided by Virtual Connect. You can override this setting and use the
MAC addresses that were assigned to the hardware during manufacture by selecting the Use Server Factory
Defaults for Ethernet MAC addresses checkbox. This action applies to every Ethernet connection in the
profile. For additional information, see "MAC Address Settings."
WWNs for the domain are provided by Virtual Connect. You can override this setting and use the WWNs
that were assigned to the hardware during manufacture by selecting the Use Server Factory Defaults for Fibre
Channel WWNs checkbox. This action applies to every Fibre Channel connection in the profile. For
additional information, see "WWN settings (on page
)."
Serial numbers (logical) for the domain are provided by Virtual Connect. You can override this setting and
use the serial numbers that were assigned to the hardware during manufacture by selecting the User Server
Factory Defaults for Serial Numbers (Logical) checkbox. This action applies to this profile. For additional
information, see "Serial Number (Logical) Settings (on page
)."