HP 3PAR Operating System Software - Manual (Page 141)

3. In the menu that appears, click Rollback Tune.
4. Click Yes.
Managing Virtual Volume Sets
When working with virtual volume sets, you can:
“Creating Virtual Volume Sets” (page 141)
“Editing a Virtual Volume Set” (page 141)
“Adding a Virtual Volume to a Virtual Volume Set” (page 142)
“Exporting Virtual Volume Sets” (page 142)
“Removing a Virtual Volume Set” (page 143)
“Viewing Virtual Volume Sets” (page 143)
“Viewing a Single Virtual Volume Set” (page 144)
Creating Virtual Volume Sets
To create a virtual volume set:
1.
In the Manager Pane, click Provisioning.
2. In the Management Tree, click right-click Virtual Volume Sets under the system on which you
wish to create the volume set.
3. In the menu that appears, click Create Virtual Volume Set.
The Create Virtual Volume Set wizard appears.
General
1. System - Select the system to create the virtual volume set.
2. Domain - select the domain in which to create the new virtual volume set, or if not required,
select <none>.
3. Name - Enter a name for the new set.
4. Comments - Enter any notes about the virtual volume set.
5. Click Next to assign virtual volumes to the set.
Volumes
1. To assign available volumes:
a.
Select one or more volumes from the Available volumes list.
b. Click the down arrow to add the selected volume(s) to the Assigned volumes list.
2. Click Next to go to the Summary page, or click Finish to complete the wizard.
Summary
Review the summary information, then click Finish.
Editing a Virtual Volume Set
To edit a virtual volume set:
1.
Access the Virtual Volume Sets screen.
2. Right-click the virtual volume set you wish to edit.
3. In the menu that appears, click Edit.
The Edit Virtual Volume Set wizard appears.
General
1. Name - Enter a name for the set.
Managing Virtual Volume Sets 141