HP 3PAR Operating System Software - Manual (Page 372)

31 Viewing the Node Subsystems Tab
The Hardware Inventory Node Subsystems tab provides information about controller node
components. The information is included on eight additional tabs, which are discussed in the
following sections:
“Viewing the Node Subsystems Controller Nodes Tab” (page 372)
“Viewing the Node Subsystems CPUs Tab” (page 373)
“Viewing the Node Subsystems Internal Drives Tab” (page 374)
“Viewing the Node Subsystems Physical Memory Tab” (page 374)
“Viewing the Node Subsystems Adapter Cards Tab” (page 375)
“Viewing the Node Subsystems SFPs Tab” (page 376)
“Viewing the Node Subsystems Power Supplies Tab” (page 377)
“Viewing the Node Subsystems Batteries Tab” (page 378)
To access the Hardware Inventory Node Subsystems tab:
1.
Click Hardware Inventory in the Manager Pane.
2. In the Management Tree, select the Storage Systems node, or select a specific system node
(for example, s424).
3. In the Management Window, click the Node Subsystems tab.
Viewing the Node Subsystems Controller Nodes Tab
The Node Subsystems Controller Nodes tab displays information about the system's controller node
pairs.
To access the Node Subsystems Controller Nodes tab, click the Controller Nodes tab after accessing
the Node Subsystem tab.
1.
Click Hardware Inventory in the Manager Pane.
2. In the Management Tree, select the Storage Systems node, or select a specific system node
(for example, s424).
3. In the Management Window, click the Controller Nodes tab.
The Node Subsystems Controller Nodes tab displays the following information:
Description Column
The name of the storage system. System*
The controller node name. Name
372 Viewing the Node Subsystems Tab