HP 3PAR Operating System Software - Manual (Page 98)

Description Column
Primitive sequence protocol error. There were errors during the transmission of a
fibre channel primitive sequence. This might indicate an error during the loop
recovery or initialization. Primitive Sequence
Invalid transmission word. Illegal fibre channel transmission word received. Invalid Word
Invalid cyclical redundancy check. Data corruption in the fibre channel frame. Invalid CRC
Viewing Paths
To view host paths:
1.
In the Manager pane, click Hosts.
2. In the Management tree, click Paths under the system that contains the host paths you wish to
view.
The Paths screen is divided into a list pane and a detail pane. The list pane displays a summary
of all host paths in the system. The detail pane displays detailed information about a single host
path selected from the list pane.
“List Pane” (page 98)
“Detail Pane” (page 98)
List Pane
The list pane of the Paths screen provides the following information:
Description Column
The host's World-Wide Name (WWN) or iSCSI name. Host WWN/iSCSI Name
The host name. If no name is displayed, the path is unassigned. Each host name is a
link to the host Summary tab. Host Name
The domain in which the host resides. Domain
The type of path, Fibre Channel or iSCSI. Type
The port to which the path is connected (in node:slot:port format). Each port is a link
to the port summary. Port
The IP address if an iSCSI path. iSCSI IP Address
Detail Pane
The detail pane displays detailed information about a single host path selected from the list pane
and is displayed on the following three tabs:
“VLUN Templates Tab” (page 99)
“Active VLUNs Tab” (page 99)
“Path Summary Tab” (page 100)
98 Managing Hosts