HP Virtual Connect 8Gb 24-port Fibre Channel Module for c-Class BladeSystem User Manual
Page 106
Virtual Connect networks 106
With VC 2.30 and later, a maximum of 128 associated networks is supported in each shared uplink set. In
VC 3.30 and later, this limitation has been removed. There is a limit of 1000 networks per VC domain.
Additionally, the VLAN Capacity (on page
) might place restrictions on the number of networks that can
be added to a shared uplink set.
The following table describes the fields within the Define Shared Uplink Set screen.
Field name
Description
Ethernet Shared External Uplink
Set
Uplink Set Name
Descriptive name for the shared uplink set. Do not use spaces.
External Uplink Ports
Port
Enclosure, bay, and port number
Port Role
Displays whether the port is designated as primary or secondary
Port Status
Shows the link status, link speed, and connectivity of the port. If the port is
unlinked and no connectivity exists, the cause is displayed. For more
information about possible causes, see "Port status conditions (on page
)."
Connector type
The type of connector on the port; for example, RJ-45
Connected to
If the individual port is connected to a switch that supports LLDP, the switch
MAC address and switch port number appear. A link is provided to obtain
more information about the far-end switch port.
PID
PID status icon (illuminated or not illuminated) for the port
Speed/Duplex
Pull-down menu to specify the speed and duplex (where applicable) of the
uplink port
Action
Perform delete operations
Associated Networks
(VLAN-tagged)