HP Virtual Connect 8Gb 24-port Fibre Channel Module for c-Class BladeSystem - Manual (Page 181)

Virtual Connect server profiles 181
b. Hover your mouse over each server blade in the Front View of the enclosure to find the HP ProLiant
BL680c G7 Server Blade, and then click the server blade.
The Server Bay Status screen appears. You can also view this screen by clicking the HP ProLiant
BL680c G7 Server Blade device bay in the Hardware Overview section in the left navigation tree.
c. Be sure that the Power Status/Control status value is Off. If the status is On, click Momentary Press
to power down the server blade.
2. Add a SAN fabric.