HP Virtual Connect 8Gb 24-port Fibre Channel Module for c-Class BladeSystem - Manual (Page 25)

Virtual Connect domains 25
c-Class BladeSystem Setup and Installation Guide on the Installing tab of the HP BladeSystem Technical
Resources website ( http://www.hp.com/go/bladesystem/documentation ).
The following table describes the columns within the Domain Settings (Enclosures) screen.
Column Description
Enclosure ID Assigned ID of the enclosure
Enclosure name Name of the enclosure
Enclosure serial number Serial number of the enclosure
Rack name
Name of the rack (assigned through the Onboard Administrator)
OA IP Address "Local Enclosure" indicates this enclosure is managed by the local Onboard
Administrator
Status
Displays whether the enclosure has been imported
Action Perform import and delete operations.
The following table describes the available actions in the Domain Settings (Enclosures) screen. Clicking
another link in the pull-down menu or left navigation tree causes current edits that have not been applied to
be lost.
Task Action
Import an enclosure Click the Import link in the Action column, or left-click on the enclosure
row, right-click to display a menu, and then select Import.
Add and import a remote
enclosure (" Adding and
importing a remote enclosure " on
page 26 )
Click Add below the table, or right-click inside the table, and then select
Find.