HP 3000 Enterprise Virtual Array - Manual (Page 140)

command
keyword
keyword [value]
keyword [value1] [value2]
The command is followed by one or more keywords. Consider the following rules and conventions:
• Commands and keywords are case-insensitive.
• Required keyword values appear in standard font: [value]. Optional values are shown in italics:
[value].
• Underlined portions of the keyword in the command format indicate the abbreviated form that
can be used. For example, the Delete keyword can be abbreviated Del.
The command-line completion feature makes entering and repeating commands easier. Table 20 lists
the command-line completion keystrokes.
Table 20 Command-line completion
Effect Keystroke
Completes the command line. Enter at least one character and press Tab to
complete the command line. If more than one possibility exists, press Tab again
to display all possibilities.
Tab
Scrolls backward through the list of previously entered commands. Up arrow
Scrolls forward through the list of previously entered commands. Down arrow
Moves cursor to the end of the command line. Ctrl+E
The command set performs monitoring and configuration tasks:
• Commands related to monitoring tasks are available to all account names.
• Commands related to configuration tasks are available only within an Admin session.
• An account must have Admin authority to enter the Admin Start command, which opens an
Admin session. See the “
Admin command ” on page 140.
Admin command
Opens and closes the Admin session. The Admin session provides commands that change
mpx100/100b configurations. Only one Admin session can be open on the mpx100/100b at any
time. An inactive Admin session will time out after a period of time which can be changed using the
Set Properties
command.
Admin Authority
adminstart (or begin) end (or stop) cancel Syntax
start (or begin)
Opens the Admin session.
Keywords
end (or stop)
Closes the Admin session. The Logout, Shutdown, and Reset
commands will also end an Admin session.
Command line interface 140