HP 3000 Enterprise Virtual Array - Manual (Page 78)

Storage setup for Apple Mac OS X
1. Present LUNs using HP Command View EVA.
See Using HP Command View EVA to configure LUNs to iSCSI initiators , page 127.
2. Verify that the EVA LUNs are presented to the Macintosh iSCSI Initiator:
a. Open the Xtend SAN iSCSI application.
b. Select the mpx100b target entry under the host name.
c. Click the LUNs button.
A list of presented EVA LUNs is displayed ( Figure 33 ).
Figure 33 Presented EVA LUNs
.
NOTE:
If no LUNs appear in the list, log out and then log in again to the target, or a system reboot
may be required.
3. Set up the iSCSI drive on the iSCSI Initiator:
a. Open Disk Utilities from the Apple Max OS X Finder Applications list.
b. Format and partition the EVA LUN as needed.
Setting up the iSCSI Initiator and storage 78