HP QLogic QMH4062 1GbE iSCSI Adapter for c-Class BladeSystem - Manual (Page 17)

Setup 17
17. Return to the Configuration tab, and then select the adapter you configured.
18. Verify that the system indicates the correct number of targets in Connected Targets under Details.
19. Check Devices and Paths in View under Details to verify that the targets are listed.
20. When the rescan completes, you can create the datastores on the targets.
iSCSI Name Server iSNS
For additional information about the iSCSI name server, iSNS, see "Configuring iSNS to Automatically
Discover Targets" in the QCC Help System.
iSCSI function configuration
1. Press Ctrl+Q at the first CTRL+Q prompt:
Press <Ctrl+Q> to enter setup menu