HP QLogic QMH4062 1GbE iSCSI Adapter for c-Class BladeSystem User Manual
Page 35
Advertising
Setup 35
1.
Select IPv4 DHCP Boot Settings, and then press the Enter key.
2.
Select Vendor ID:, and then press the Enter key.
3.
Enter the vendor ID information, and then press the Enter key.
4.
Select the Alternate Client ID:, and then press the Enter key.
5.
Enter the alternate client information, and then press the Enter key.
6.
Press the Escape key to exit the configuration screen.
7.
Select Save Changes at the prompt, and then press the Enter key.
Advertising