Introduction, Overview, Installing iscsi in linux, esxi, and windows – HP QLogic QMH4062 1GbE iSCSI Adapter for c-Class BladeSystem User Manual
Page 4
Introduction 4
Introduction
Overview
This section describes the driver and agent installation, configuration, operation, and troubleshooting of the
NC526 series CNA iSCSI function.
Installing iSCSI in Linux, ESXi, and Windows
For information about specific operating system support, see the QLogic website
•
Linux—For information about packaging content, Linux OS support, supported features, driver
deployment, and driver system parameters, see "iSCSI Adapter Inbox Driver Update Readme."
•
ESXi—For information about packaging content, ESXi OS support, using the driver, and installing the
driver, see "iSCSI Adapter Driver and IMA Plug-in for VMware ESXi 5.0 .x Readme."
•
Windows—For information about packaging content, Windows OS support, and using the driver, see
"iSCSI Adapter STOR Miniport Driver for Windows Readme."
Configuring iSCSI in QCC GUI, interactive QCC CLI,
or non-interactive CLI
For information about configuring QCC GUI, interactive QCC CLI, or non-interactive CLI, see the QLogic
website
•
QCC GUI—See "QConvergeConsole Help System iSCSI Initiator 3-2 SN0054671-00 D."
•
Interactive QCC CLI—See "QConvergeConsole CLI User's Guide."
•
Non-Interactive QCC CLI—See "SCSI Noninteractive Commands" in the "QConvergeConsole CLI
User's Guide."