HP QLogic QMH4062 1GbE iSCSI Adapter for c-Class BladeSystem - Manual (Page 26)

Setup 26
The initial CHAP name defaults to a blank space. If your site uses CHAP, set the CHAP name as follows:
1. Select the Initiator CHAP Name, and then press the Enter key.
2. Enter the Initiator CHAP name in the New: field, and then press the Enter key. Make sure that the name
matches the Initiator CHAP name configured on the SAN.
3. Select Initiator CHAP secret, and then press the Enter key.
4. Enter the CHAP secret, and then press the Enter key.