HP OneView - Manual (Page 234)

Table 11 SAN A and SAN B Fibre Channel network configurations
Notes Value Configuration attribute
Fibre Channel Type
Choose Fabric attach for Fibre Channel networks that connect to SAN
switches in the data center. Fabric attach Fabric type
This is the default value displayed on the Create network screen. 2.5 Gb/s Preferred bandwidth
This is the default value displayed on the Create network screen. 8 Gb/s Maximum bandwidth
This is the default value displayed on the Create network screen. Auto Uplink speed
This is the default value displayed on the Create network screen. Auto Login redistribution
This is the default value displayed on the Create network screen. 30 seconds Link stability time
Fibre Channel networks directly attached to the 3PAR Storage System (Flat SAN)
The sample data center has a 3PAR Storage System that is connected directly to an enclosure. This
is called a Flat SAN or Direct attach network configuration. To see a graphical representation of
the configuration, see
Figure 17 (page 235) .
The names of the Direct attach Fibre Channel networks follow:
•
FlatSAN A
•
FlatSAN B
Table 12 FlatSAN A and FlatSAN B Fibre Channel network configurations
Notes Value Configuration attribute
Fibre Channel Type
Choose Direct attach for Fibre Channel networks that connect to the 3PAR
storage system. Direct attach Fabric type
This is the default value displayed on the Create network screen. 2.5 Gb/s Preferred bandwidth
This is the default value displayed on the Create network screen. 8 Gb/s Maximum bandwidth
This is the default value displayed on the Create network screen. Auto Uplink speed
This is the default value displayed on the Create network screen. Auto Login redistribution
This is the default value displayed on the Create network screen. 30 seconds Link stability time
234 Step by step: Configuring an example data center using HP OneView