HP Color LaserJet CP1215 Printer - Manual (Page 40)

Print on both sides of the page (manual duplex)
To print on both sides of the paper, you must print the first side, turn the paper over and load it into the
tray again, and then print the second side.
1. From the Windows desktop, click Start, Settings, and then Printers (or Printers and Faxes for
some Windows versions).
2. Right-click the HP Color LaserJet CP1210 Series, and select Properties.
3. Click the Configure tab.
4. In the Paper Handling section, select Allow Manual Duplexing.
5. Click OK.
6. Open the Print dialog in the software program from which you are printing. In most programs this
is done by clicking File and then Print.
7. Select the HP Color LaserJet CP1210 Series.
8. Click Properties or Preferences. The exact option name depends on the software program from
which you are printing.
9. Click the Finishing tab.
10. Select the Print On Both Sides (Manually) check box.
11. Click OK.
12. Print side one of the document.
13. After side one has printed, remove the remaining paper from the tray and set it aside until after you
finish the manual two-sided print job.
14. Gather the printed pages, and straighten the stack.
15. Return the stack to the tray with the printed side down and the top edge toward the back of the
tray.
16. Press the Resume button to print side two.
32 Chapter 4 Print tasks ENWW