HP Color LaserJet CP1215 Printer - Manual (Page 55)

Print Quality
Use the HP Color LaserJet CP1210 Series Toolbox Print Quality options to improve the appearance
of print jobs.
The following options are provided for controlling print quality:
Color Calibration ● Power On Calibration. Specify whether the product should calibrate when you turn it on.
● Calibration Timing. Specify how frequently the product should calibrate. The default
setting is 48 hours.
● Calibrate Now. Click this button to calibrate immediately.
Optimize
NOTE: HP recommends that you change these settings only if an HP customer
support person advises you to.
● Background Toner. Turn this setting on to reduce the occurrence of shaded background
on the printed pages.
● Extra Cleaning. Turn this setting on to reduce the occurrence of blurred images.
● Drum Banding. Turn this setting on to reduce the occurrence of horizontal streaks on
printed images.
● Transfer Belt Cleaning. Turn this setting on to reduce the occurrence of vertical streaks
in the background of printed images.
● Transfer Belt Cleaning Voltage. Use this setting to fine-tune the voltage that is used
during the cleaning process.
● Transfer Belt Voltage <color>. Use this setting to fine-tune the voltage that is applied to
internal components while producing the printed image.
NOTE: You must click Apply before your changes take effect.
Print Density
Use the Print Density settings to make fine adjustments in the amount of each color of toner that is
used for your printed documents.
● Contrasts. Contrast is the range of difference between light (highlight) and dark (shadow) colors.
To increase the overall range between light and dark colors, increase the Contrasts setting.
● Highlights. Highlights are colors that are nearly white. To darken highlight colors, increase the
Highlights setting. This adjustment does not affect midtone or shadow colors.
● Midtones. Midtones are colors that are halfway between white and solid density. To darken
midtone colors, increase the Midtones setting. This adjustment does not affect highlight or shadow
colors
● Shadows. Shadows are colors that are nearly solid density. To darken shadow colors, increase
the Shadows setting. This adjustment does not affect highlight or midtone colors.
● Restore defaults. Select Restore defaults to reset all of the density settings to the factory settings.
ENWW Use the HP Color LaserJet CP1210 Series Toolbox software 47