HP Color LaserJet CP1215 Printer - Manual (Page 59)

Cartridge out override
An Order Supplies message appears when a print cartridge is nearing the end of its life. A Replace
Supplies message appears when the print cartridge is depleted. To ensure optimal print quality, HP
recommends replacing a print cartridge when the Replace Supplies message appears. Print-quality
problems can occur when using a cartridge that is depleted, resulting in waste of print media and toner
from other cartridges. Replacing a print cartridge when the Replace Supplies message appears can
prevent this waste.
The Cartridge out override feature in the HP Color LaserJet CP1210 Series Toolbox allows the product
to continue using a print cartridge that has reached the recommended replacement point.
WARNING! Using the Cartridge out override feature can result in unsatisfactory print quality.
WARNING! All print defects or supply failures incurred when an HP supply is used in cartridge-
out-override mode will not be considered to be defects in materials or workmanship in the supply
under the HP Print Cartridge Warranty Statement. For warranty information, see
Print cartridge
limited warranty statement on page 89 .
You can enable or disable the Cartridge out override feature at any time, and you do not have to re-
enable it when you install a new print cartridge. When the Cartridge out override feature is turned on,
the product automatically continues printing when a print cartridge reaches the recommended
replacement level. A Replace Supplies Override In Use message appears while a print cartridge is
being used in override mode. When you replace the print cartridge with a new supply, the product
deactivates the override mode until another print cartridge reaches the recommended replacement level.
Enable or disable the Cartridge out override feature
1. Open the HP Color LaserJet CP1210 Series Toolbox. See View HP Color LaserJet CP1210 Series
Toolbox on page 43 .
2. Click the Device Settings folder, and then click the System Setup page.
3. Next to Cartridge out override select On to enable the feature. Select Off to disable it.
ENWW Manage supplies 51