Print modes, Paper types, System setup – HP Color LaserJet CP1215 Printer User Manual
Page 56: Set up status alerts, Service
Print Modes
Use the Print Modes page to customize the fuser settings for specific paper types. Changing the print
modes can help resolve persistent print-quality problems.
NOTE:
HP recommends that you change these settings only if an HP customer support person
advises you to.
Paper Types
Use the HP Color LaserJet CP1210 Series Toolbox Paper Types options to configure print modes that
correspond to the various media types. When you select Restore modes, all of the modes are reset to
the factory settings.
NOTE:
You must click Apply before your changes take effect.
System Setup
Use the HP Color LaserJet CP1210 Series Toolbox System Settings options to configure
miscellaneous product settings.
●
Jam recovery. If this option is on, the product automatically reprints pages that are damaged when
a jam occurs.
●
Auto continue. If this setting is Off, the product waits indefinitely for you to respond to prompts
that require action. If this setting is On, the product continues printing after a specific length of time,
even if you have not responded to the prompt.
●
Sleep time-out. Specify the length of time, in seconds, for the product to enter Sleep mode, after
no activity has occurred.
●
Cartridge out override. Set the option whether to continue printing after a cartridge has reached
the threshold for end of life.
●
Automatic resolution reduction. Set the option to automatically reduce the print resolution if the
page requires too much memory.
●
Location. Select the appropriate country/region.
NOTE:
You must click Apply before your changes take effect.
Set up Status Alerts
Use the HP Color LaserJet CP1210 Series Toolbox to set up the product so that it issues pop-up alerts
to your computer when certain events occur. Events that trigger alerts include jams, low levels of toner
in HP print cartridges, non-HP print cartridge in use, empty input trays, and specific error messages.
NOTE:
You must click Apply before your changes take effect.
Service
Click Restore to return the product settings to the factory default settings.
48
Chapter 6 Manage and maintain
ENWW