HP Color LaserJet CP1215 Printer - Manual (Page 67)

Status-light patterns
NOTE: In the illustrations in the following table, the small “burst” lines around a light indicate
that the light is blinking.
Light status State of the product Action
Initialization/Startup/Calibration
While in the Startup state, the Resume,
Ready, and Attention lights cycle (at the
rate of 500 ms) one after another.
Job Cancel
After the cancellation process has been
completed, the product returns to the
Ready state.
During the Initialization and Job Cancel
processes, pressing buttons has no
effect.
Ready
The product is ready with no job activity.
To print a Configuration page and a
Supplies Status page, press and hold the
Resume button for longer than one
second.
Processing Data
The product is processing or receiving
data.
To cancel the current job, press the Job
Cancel button.
ENWW Status-light patterns 59