Use hp eprint, Set up hp eprint (lcd control panel) – HP LaserJet Pro 400 Printer M401 series User Manual

Page 64

Advertising
background image

Use HP ePrint

Use HP ePrint to print documents by sending them as an email attachment to the product's email

address from any email enabled device.

NOTE:

The product must be connected to a wired or wireless network and have Internet access to use

HP ePrint. HP ePrint is not available with the HP LaserJet Pro 400 M401d Printer.

Set up HP ePrint (LCD control panel)

1.

To use HP ePrint, you must first enable HP Web Services.

a. On the product control panel, press the

OK

button to open the menus.

b. Select the HP Web Services menu, and then press the

OK

button.

c.

Select the Enable Web Services option, and then press the

OK

button.

When the Web Services option is enabled, the product prints an information sheet that

includes the product code and instructions to sign up at

www.eprintcenter.com

.

2.

Once you have registered the product, use the HP ePrintCenter Web site to define security settings

and to configure default print settings for all HP ePrint jobs sent to this product.

a. Go to

www.hpeprintcenter.com

.

b. Click Sign In, and enter your HP ePrintCenter credentials or sign up for a new account.

c.

Select your product from the list, or click + Add printer to add it. To add the product, you

need the printer code, which is the segment of the product email address that is before the @

symbol. You can get this code by printing the Web Services page from the product control

panel.

After you have added your product, you will have the option to customize the product email

address.

NOTE:

This code is valid for only 24 hours from the time you enable HP Web Services. If it

expires, follow the instructions to enable HP Web Services again, and obtain a new code.

d. To prevent your product from printing unexpected documents, click ePrint Settings, and

then click the Allowed Senders tab. Click Allowed Senders Only, and add the email

addresses from which you want to allow ePrint jobs.

e. To set up default settings for all ePrint jobs sent to this product, click ePrint Settings, click

Print Options, and select the settings that you want to use.

3.

To print a document, attach it to an email message sent to the product's email address. Both the

email message and the attachment will print.

52

Chapter 3 Print

ENWW

Advertising