Update the firmware, Manually update the firmware (lcd control panel) – HP LaserJet Pro 400 Printer M401 series User Manual
Page 92
Update the firmware
HP offers periodic upgrades to the product firmware. You can load the firmware updates manually, or
you can set the product to automatically load firmware updates.
Manually update the firmware (LCD control panel)
1.
On the product control panel, press the
OK
button to open the menus.
2.
Open the following menus:
●
Service
●
LaserJet Update
●
Check For Updates Now
3.
Select the Yes option, and then press the
OK
button to prompt the product to search for firmware
updates. If the product detects an upgrade, it will begin the update process.
Manually update the firmware (touchscreen control panel)
1.
From the Home screen on the product control panel, touch the Setup button.
2.
Open the following menus:
●
Service
●
LaserJet Update
●
Check For Updates Now
3.
Touch the Yes button to prompt the product to search for firmware updates. If the product detects
an upgrade, it will begin the update process.
Set the product to automatically update the firmware (LCD control
panel)
NOTE:
This section applies to the HP LaserJet Pro 400 M401a Printer model only.
1.
On the product control panel, press the
OK
button to open the menus.
2.
Open the following menus:
●
Service
●
LaserJet Update
●
Manage Updates
●
Prompt Before Install
3.
Select the Install Automatically option, and then press the
OK
button.
80
Chapter 4 Manage and maintain
ENWW