Economy settings, Print with economode, Set the sleep delay – HP LaserJet Pro 400 Printer M401 series User Manual
Page 83: Set the sleep delay (lcd control panel), Print with economode set the sleep delay
Economy settings
Print with EconoMode
This product has an EconoMode option for printing drafts of documents. Using EconoMode can use less
toner and decrease the cost per page. However, using EconoMode can also reduce print quality.
HP does not recommend the full-time use of EconoMode. If EconoMode is used full-time, the toner
supply might outlast the mechanical parts in the toner cartridge. If print quality begins to degrade and
is no longer acceptable, consider replacing the toner cartridge.
NOTE:
If this option is not available in your print driver, you can set it using the HP Embedded Web
Server.
1.
From the software program, select the Print option.
2.
Select the product, and then click the Properties or Preferences button.
3.
Click the Paper/Quality tab.
4.
Click the EconoMode check box.
Set the sleep delay
The sleep delay feature determines how long the product must be inactive before it switches to sleep
mode to reduce power consumption.
Set the sleep delay (LCD control panel)
1.
On the product control panel, press the
OK
button to open the menus.
2.
Open the following menus:
●
System Setup
●
Energy Settings
●
Sleep Delay
3.
Select the time for the delay, and then press the
OK
button.
NOTE:
The default value is 15 Minutes.
ENWW
Economy settings
71