HP OneView - Manual (Page 140)

2 of Enclosure 1, then the data center switch ports that connect to those X2 ports must be
configured to support VLAN IDs 1101, 1102, 1103, and 1104.
•
If multiple uplinks in an uplink set connect the same interconnect to the same data center switch,
to ensure that all the uplinks in the uplink set are active, you must configure the data center
switch ports for LACP (Link Aggregation Control Protocol) in the same LAG (Link Aggregation
Group).
Also consider the type of network traffic and if you are creating an active/standby or active/active
configuration .
18.6 Learning more
•
“Managing interconnects, logical interconnects, and logical interconnect groups” (page 141)
•
“Managing the appliance settings” (page 178)
140 Managing networks and network resources