HP LaserJet 9000 Printer series - Manual (Page 136)

7 Problem solving 136
Understanding product messages
68.x PERMANENT
STORAGE FULL
alternates with
Continue
The product NVRAM is full. Some settings saved in the NVRAM might have been reset to the
factory defaults.
Printing can continue, but there might be some unexpected functions because an error occurred
in permanent storage.
Touching Continue should clear the message.
If this message persists, contact an HP-authorized service or suppor t provider (see the
introduce guide on the product CD, or go to
www.hp.com/suppor t/lj9000 ).
68.x PERMANENT
STORAGE WRITE FAIL The product NVRAM is failing to write.
Printing can continue, but there might be some unexpected functions because an error occurred
in permanent storage.
Touching Continue should clear the message.
If this message persists, contact an HP-authorized service or suppor t provider (see the
introduce guide on the product CD, or go to
www.hp.com/suppor t/lj9000 ).
69.x
PRINTER ERROR A temporary printing error occurred.
Turn the product off, reseat the duplex printing accessory, and then turn the product on.
If this message persists, contact an HP-authorized service or suppor t provider (see the
introduce guide on the product CD, or go to
www.hp.com/suppor t/lj9000 ).
79.xxxx
PRINTER ERROR A critical hardware error occurred.
Turn the product off, and then turn the product on.
If the message persists, contact an HP-authorized service or suppor t provider (see the
introduce guide on the product CD, or go to
www.hp.com/suppor t/lj9000 ).
8x.yyyy The EIO accessory card in slot x has encountered a critical error as specified by yyyy .
Message Explanation or recommended action