HP LaserJet 9000 Printer series - Manual (Page 198)

B Control panel menus 198
Configure device menu
PAPER DESTINATION=
STANDARD OUTPUT BIN STANDARD OUTPUT
FACE UP
OPTIONAL BIN Allows the user to configure the output paper bin destination. Only
installed bins will appear on the menu.
DUPLEX=OFF OFF
ON Set the value to ON to print on both sides (duplex) or OFF to print on one
side (simplex) of a sheet of paper.
For more information, see the introduce guide on the product CD, or go
to
www.hp.com/cposuppor t/ .
BINDING=LONG EDGE LONG EDGE
SHORT EDGE Allows the user to change the binding edge for duplex printing. The
menu item is displayed when a duplex printing accessory is installed in
the product and
DUPLEX=ON .
OVERRIDE A4/LETTER=
NO YES
NO This command is used to print on letter-size paper when an A4 job is
sent, but no A4-size paper is loaded in the product (or to print on
A4-size paper when a letter job is sent, but no letter paper is loaded in
the product).
MANUAL FEED=OFF OFF
ON Feed the paper manually from Tray 1, rather than automatically from a
tray. When
MANUAL FEED=ON and Tray 1 is empty, the product goes
offline when it receives a print job. It then displays MANUALLY FEED
[PAPER SIZE] .
For more information, see “Manually feeding paper from Tray 1” on
page 66 .
EDGE TO EDGE
OVERRIDE=OFF OFF
ON Turns the edge-to-edge mode on or off for all print jobs. This mode can
be overridden inside a print job by an edge-to-edge PJL variable.
Item Values Explanation