HP LaserJet 9000 Printer series User Manual
Page 214
B Control panel menus
214
Configure device menu
IPX/SPX
ENABLE
FRAME TYPE
SOURCE
ROUTING
ON
OFF
AUTO
EN_8023
EN_II
EN_8022
EN_SNAP
TR_8022
TR_SNAP
AUTO
OFF
ALL ROUTES
SINGLE ROUTE
Selects whether the IPX/SPX protocol stack is enabled (
ON
) or
disabled (
OFF
).
Selects the frame type setting for your network
AUTO
(default) automatically sets and limits the frame type to
the first one detected.
For an Ethernet network only, frame type selections include
EN_8023
,
EN_II
,
EN_8022
, and
EN_SNAP
.
For a Token Ring network only, frame type selections include
TR_8022
and
TR_SNAP
.
For a Token Ring network only, specify the NetWare Token
Ring Source Routing parameter.
AUTO
(default): The type of source routing required on the
network is automatically sensed.
OFF:
All packets are sent without source routing, and only
packets from the same ring are received.
ALL ROUTES
and
SINGLE ROUTES
: All packets are sent with
source routing (broadcasts and when the route is unknown).
APPLETALK
ENABLE
ON
OFF
For an Ethernet network only, selects whether the AppleTalk
protocol is enabled (
ON
) or disabled (
OFF
).
DLC/LLC
ENABLE
ON
OFF
Selects whether the DLC/LLC protocol stack is enabled (
ON
) or
disabled (
OFF
).
Item
Options
Values
Explanation