HP LaserJet 9000 Printer series - Manual (Page 202)

B Control panel menus 202
Configure device menu
Print quality submenu
Some items in this menu are accessible from a software application, or from the driver (if the appropriate driver is installed).
Driver and software application settings override control panel settings. For more information, see
“Using features in the
driver” on page 63 .
Item Values Explanation
SET
REGISTRATION Shift the margin alignment to center the image on the page from top to bottom,
and left to right. You can also align the image on the front, with the image
printed on the back.
RESOLUTION=
FASTRES 1200 300
600
FASTRES 1200 Select the resolution from the values listed below:
300 : Produces draft print quality at maximum product speed (50 ppm for the
HP LaserJet 9000mfp and 40 ppm for the HP LaserJet 9000Lmfp). 300 dpi (dots
per inch) is recommended for some bitmapped fonts and graphics, and for
compatibility with the HP LaserJet III family of printers.
600 : Produces high print quality at maximum product speed (50 ppm for the
HP LaserJet 9000mfp and 40 ppm for the HP LaserJet 9000Lmfp).
FASTRES 1200 : Produces optimum print quality (comparable to 1,200 dpi) at
maximum product speed (50 ppm for the HP LaserJet 9000mfp and 40 ppm for
the HP LaserJet 9000Lmfp).
Note
It is best to change the resolution from the driver or software application. (Driver and
software settings override control panel settings.)