Printing transparencies – HP LaserJet 9000 Printer series User Manual
Page 61
5 Printing
61
Printing special paper
Special cautions:
z
Do not load Tray 1 to capacity, because labels are heavier than paper.
z
Do not use labels that are separating from the backing sheet, wrinkled, or damaged in any way.
z
Do not use labels that have the backing sheet exposed. (Labels must cover the entire backing sheet with no exposed
spaces.)
z
Do not feed a sheet of labels through the product more than once. The adhesive backing is designed for only one pass
through the product.
z
Do not print on both sides of labels.
Printing transparencies
z
Transparencies used in this product must be able to withstand 200° C (392° F), the maximum temperature for the
product.
z
Use only transparencies recommended for use in laser printers.
z
Use the standard output bin for transparencies.
CAUTION
Do not attempt to print on both sides of transparencies. Do not attempt to print envelopes, custom paper, or paper
heavier than 199 g/m
2
(53 lb). Damage to the product or jams might result.
Guidelines for custom-size paper, card stock, and heavy paper
z
You can print custom-size paper from Tray 1, Tray 2, Tray 3, or Tray 4.
z
Any size paper heavier than 199 g/m
2
(53 lb) must be printed only from Tray 1. For paper specifications, see the
introduce guide on the product CD, or go
z
If you are printing from Tray 1, the edge of the paper feeding into the product must be at least 98 mm (3.9 inches) wide to
allow rollers inside the product to grab the paper, and a maximum of 312 mm (12.3 inches). Measuring from the leading
edge to the trailing edge of the paper, the length must be at least 191 mm (7.5 inches) and a maximum of 470 mm
(18.5 inches).
z
If you are printing from Tray 2 or Tray 3, the edge of the paper feeding into the product must be at least 148 mm
(5.8 inches) wide to allow rollers inside the product to grab the paper, and a maximum of 297 mm (11.7 inches).
Measuring from the leading edge to the trailing edge of the paper, the length must be at least 210 mm (8.3 inches) and a
maximum of 432 mm (17.0 inches).