HP LaserJet 9000 Printer series - Manual (Page 81)

5 Printing 81
Interrupting and resuming printing
Interrupting and resuming printing
The job interrupt and resume feature lets you temporarily stop the current print job in order to print another job through a FIR
connection. When the FIR job is completed, the interrupted job resumes printing.
To interrupt the job at the product, connect to the FIR port on the product and send a job to the product. The product stops
printing the current job when it reaches the end of the job it is printing. The product then prints the job sent over the FIR
connection. When the product is done printing that job, it resumes printing the original job where it left off.