HP Color LaserJet Enterprise CP5525 Printer series - Manual (Page 123)

Table 7-1 Supplies status messages (continued)
Control panel message Description Recommended action
Cyan cartridge low The print cartridge is nearing the estimated
end of its useful life. The product indicates when the print
cartridge level is low. The actual print
cartridge life remaining can vary. Consider
having a replacement cartridge available to
install when the print quality is no longer
acceptable. The print cartridge does not
need to be replaced now.
Cyan cartridge very low The print cartridge is at the estimated end of
its useful life.
Print quality might decrease. Replace the
print cartridge when the print quality
becomes unacceptable.
To ensure optimal print quality, HP
recommends replacing the print cartridge at
this point. You do not need to replace the
print cartridge at this time unless the print
quality is no longer acceptable. The actual
print cartridge life can vary.
Once an HP print cartridge has reached the
very low threshold, the HP Premium
Protection Warranty on that print cartridge
has ended. All print defects or print cartridge
failures incurred when an HP print cartridge
is used in “continue in very low” mode will
not be considered to be defects in materials
or workmanship in the print cartridge under
the HP Print Cartridge Warranty Statement.
Fuser kit low The fuser kit is low. The actual supply life
remaining might vary. Consider having a
replacement fuser kit available to install
when print quality is no longer acceptable.
You do not need to replace the fuser kit at
this time unless print quality is no longer
acceptable. If print quality is no longer acceptable,
replace the fuser kit. Instructions are included
with the fuser kit.
Fuser kit very low The fuser kit is very low. The actual supply
life remaining might vary. You do not need
to replace the fuser kit at this time unless
print quality is no longer acceptable. After
an HP supply has reached the very low
threshold, the HP Premium Protection
Warranty for that supply has ended. If print quality is no longer acceptable,
replace the fuser kit. Instructions are included
with the fuser kit.
Incompatible <color> cartridge The indicated color print cartridge is not
compatible with this product. Replace the print cartridge with one that is
designed for this product.
Incompatible fuser The fuser is not compatible with this product. WARNING! The fuser can be hot while
the product is in use. Wait for the fuser to
cool before handling it.
1. Open the right door.
2. Remove the incompatible fuser.
3. Install the correct fuser.
4. Close the right door.
ENWW Solve problems with supplies 107